Related auxiliary equipment for the entire production line equipment

Introduction to High Pressure Homogenizer

A high-pressure homogenizer achieves ideal uniformity of materials in a very short period of time through shear, impact, friction, and other forces between a high-speed rotating rotor and stator. From small-scale sample processing in laboratories to large-scale processing in industrial production, homogenizers have become essential key equipment in modern processes due to their high efficiency and stability.

Introduction to Sanitary Centrifugal Pump

Centrifugal pumps generate centrifugal force through the rotation of the impeller. The impeller is driven to rotate by the pump shaft, doing work on the fluid located between the blades. The fluid is thrown from the center of the impeller to the outer circumference of the impeller by centrifugal force. When the fluid reaches the outer periphery of the impeller, the flow velocity is very high, and then it gradually expands along the volute shaped channel inside the pump casing, accelerating the fluid and ultimately discharging it.

Introduction to Rotary Pump

A rotary pump generates centrifugal force through the rotation of the rotor, accelerates and outputs liquid, and achieves the transportation of liquid. Specifically, the liquid enters the pump casing from the suction port, is accelerated by the action of the rotor, and then output under the action of centrifugal force. At the same time, the rotor leaves space on the other side to create low pressure, allowing the liquid to be continuously drawn in.

Introduction to CO2 beverage mixer

CO2 beverage mixer is used for carbonation and proportioning of various carbonated beverages (water, syrup, carbon dioxide, etc.), such as lemon, cola, juice and other soda. It is the main equipment in the complete set of beverage production equipment and a key equipment for the production of medium and high-end beverages.

Introduction to Plate Heat Exchanger

A plate heat exchanger consists of a set of rectangular metal plates pressed tightly within a frame. Each board is embossed with corrugated protrusions and has distribution holes at the four corners. There are rubber or fluororubber gaskets between adjacent plates, forming a narrow and long fluid channel.